Гидронасос Case K200330
111 ₽
Гидронасос Case K200330
Характеристики
| Диаметр вала14,8 мм | Количество секций1 | Направление вращенияпротив часовой |
| Общая длина насоса133 мм | Расстояние между крепежными отверстиями на фланце71,4, 96,1 мм |
Описание
Гидронасос CASE K200330
K919048
20/640-207 20640207
K928578
| Type of pump | gearpump |
|---|---|
| Number of elements | 1 |
| Type of flange | type J |
| Diameter of flange mounting holes D1 (mm) | 7.2 |
| Center distance of mounting holes C1 (mm) | 71.4 |
| Center distance of mounting holes C2 (mm) | 96.1 |
| Total length of pump L1 (mm) | 133 |
| Neck diameter D2 (mm) | 36.5 |
| Type of shaft | type G |
| Distance from flange to end L2 (mm) | 40 |
| Diameter of shaft D3 (mm) | 14.8 |
| Key (way) width W (mm) | 3.2 |
| Thread type (on shaft) TA2 | 7/16 UNF |
| Direction of rotation | counter clockwise |
| Position of suction port 1st element, only for pump type T POS-CO1 | side |
| Type of connections suction port1st element, only for pump type T TY-COa | type B |
| Thread type of connections suction 1st element | M8 |
| Center distance between mounting holes C-CO1a (mm) | 39.7 |
| Position of pressure 1st element, only for pump type T POS-CO2 | side |
| Type of connections pressure 1st element, only for pump type T TY-COb | type B |
| Thread type of connection pressure port 1st element TA-COb | M6 |
| Center distance between mounting holes C-CO1b (mm) | 30.2 |
| Flow control valve present | NO |
| Material of the housing | aluminium |
Технические характеристики Гидронасос Case K200330
Гидравлический насос
| Диаметр вала | 14,8 мм |
|---|---|
| Количество секций | 1 |
| Направление вращения | против часовой |
| Общая длина насоса | 133 мм |
| Расстояние между крепежными отверстиями на фланце | 71,4, 96,1 мм |
Вы смотрели
